Wrap The Piping - Beko BEVPA 090 Manual Del Propietário

8 Install indoor unit
The size of pipe (mm)

8.6 Wrap the piping

1. Use the insulation sleeve to wrap the joint part the indoor unit and the connection pipe, and then
use insulating material to pack and seal insulation pipe, to prevent generation of condensate water
on the joint part.
2. Connect the water outlet with drain pipes, and make the connection pipe, cables, and the drain
hose straight.
3. Use plastic cable ties to wrap the connecting pipes, cables and drain hose. Run the pipe sloping
downward.
Split type wall mounted air-conditioner / Owner's Manual
Indoor unit pipe
Spanner
Tightening torque table
06/06.35
09/09.52
012/012.7
015.88
019.05
Connecting pipe drain
hose and cables
Taper nut Connecting pipe
Torque wrench
Torque (N·m)
15~25
35~40
45~60
73~78
75~80
Plastic strap
35 / 220 EN