Connecting The Battery; Weld Output Terminals - Miller Blue Star 145DX Manual Del Proprietário

5-6. Connecting The Battery

Tools Needed:
1/2 in.

5-7. Weld Output Terminals

Tools Needed:
3/4 in.
OM-248 551 Page 22
1
.
Complete Parts List available at www.MillerWelds.com
+
−
2
!
Turn Engine Switch to Off.
!
Connect negative (−)
cable last.
803 595-B / 803 466
1 Negative (−) Weld Output
Terminal
2 Positive (+) Weld Output
Terminal
For Direct Current Electrode Posi-
tive (DCEP), connect work cable to
Negative (−) terminal and electrode
holder to Positive (+) terminal.
For Direct Current Electrode nega-
tive (DCEN), reverse cable con-
nections.
803 596−B