Servicing Air Cleaner; Changing Fuel Filter; Changing Oil - Miller Blue Star 145DX Manual Del Proprietário

8-3. Servicing Air Cleaner

8-4. Changing Fuel Filter

Tools Needed:

8-5. Changing Oil

2
1
Tools Needed:
.
Complete Parts List available at www.MillerWelds.com
!
Stop engine.
NOTICE − Do not run engine with-
out air cleaner or with dirty element.
1 Foam Element
Remove cover.
Wash foam element with soap and
water solution. Allow to air dry com-
pletely.
3
Dip foam element in clean engine
oil. Squeeze out excess oil. The en-
gine will smoke if too much oil re-
mains.
!
Stop engine, close fuel valve,
and let cool.
!
After servicing, start engine
and check for fuel leaks.
Stop engine, close fuel valve,
tighten connections as ne-
cessary, and wipe up spilled
fuel.
1 Fuel Filter
Locate fuel filter below fuel tank.
Release hose clamps and remove
filter. Replace filter . Ensure flow ar-
1
row points towards carburetor.
.
Change oil while engine is
warm. Make sure engine is
level when filling, checking,
and changing the oil.
1 Oil Drain Plug
2 Oil Fill/Check Plug
Remove the oil drain plug and oil fill/
check plug. Be sure to allow ample
2
time for oil to drain completely.
Reinstall drain plug and tighten to
13 ft/lb (17.6 N⋅m).
Fill crankcase according to main-
tenance label in Section 8-2.
1
Reinstall oil fill/check plug.
Kohler TP−2503B
804 081-B
Kohler TP−2503B
OM-248 551 Page 29