Sharp CV10CTXB Manual De Instalación Y Funcionamiento página 21

Point the remote control towards
the units signal receiver window and
press the desired button. A beep will
sound when the unit receives the
signal.
• Make sure nothing, such as curtains,
blocks the signal receiver window.
•
For good reception of signal, the distance
between operator and the unit should be no
more than 5 meters.
CAUTION
• Do not expose the signal receiver window to direct sunlight. This may
adversely affect its operation. If necessary, close the curtains to block out
the sunlight.
• Use of a fluorescent lamp in the same room may interfere with transmission
of the signal.
• The unit may be affected by signals emitted from other remote controllers
for televisions, VCRs or other equipment used in the same room.
• Do not leave the remote control exposed to direct sunlight or near a heater.
Protect the remote control from moisture and shock which can discolor or
damage it.
EN-19