Maintenance - Sharp CV10CTXB Manual De Instalación Y Funcionamiento

MAINTENANCE

• Changing batteries and notices
1. Slightly to press the place to take out
the back cover of wireless remote
control.(As shown in figure)
2. Take out the old batteries. (As show in
figure)
3. Insert two new AAA1.5V dry batteries,
and pay attention to the polarity. (As
show in figure)
4. Attach the back cover of wireless
remote control. (As show in figure
NOTE:
• When changing the batteries, do not use
old or different batteries, otherwise, it
can cause the malfunction of the wireless
remote control.
• If the wireless remote control will not
be used for a long time, please take
them out, and don't let the leaking liquid
damage the wireless remote control.
• The operation should be in its receiving
range.
• It should be placed at where is 1m away
from the TV set or stereo sound sets.
• If the wireless remote control cannot
operate normally, please take them out,
after 30 seconds later and reinsert, if they
cannot normally run, please change them.
.
EN-23
2
1
3
4