Installation And Removal Of Exhaust Hose - Sharp CV10CTXB Manual De Instalación Y Funcionamiento

INSTALLATION AND REMOVAL OF EXHAUST HOSE

Installation of the exhaust hose
1
Attach the window exhaust
adapter B and C to the exhaust
hose.
Extend both ends of the exhaust hose
and insert them into the window ex-
haust adapter A respectively, and turn
them until they stop. Make sure they
are securely attached.
2
Attach the window exhaust
adapter A to the unit.
Insert the two projections on the win-
dow exhaust adapter A into the two
holes on the unit, and firmly attach
them to each other.
3
Attach the exhaust hose.
Insert the exhaust hose to the window
exhaust adapter in the window panel
and turn it to lock it in place.
The exhaust hose should be as short as possible for operational
efficiency; however, it must not be twisted or bent.
Unacceptable Acceptable
EN-16
Window exhaust
adapter
Exhaust hose
Window exhaust adapter A
1
Window exhaust
adapter
Acceptable
2