Mounting The Indoor Unit; To Install The Indoor Unit - Daikin Altherma 3 H W Serie Manual De Instalación

2×
1
5 Optional: Remove the user interface panel.
NOTICE
If you remove the user interface panel, also disconnect the
cables from the back of the user interface panel to prevent
damage.
4.2

Mounting the indoor unit

4.2.1

To install the indoor unit

1 Fix the wall bracket (accessory) to the wall (level) with 2 Ø8 mm
bolts.
a
a Optional: If you want to fix the unit to the wall from inside
the unit, provide an additional screw plug.
2 Lift the unit.
42 kg
EABH/X16DF6V+9W
Daikin Altherma 3 H W
4P644479-1 – 2020.12
3
2
2×
3 Attach the unit to the wall bracket:
▪ Tilt the top of the unit against the wall at the position of the
wall bracket.
▪ Slide the bracket on the back of the unit over the wall
bracket. Make sure the unit is fixed properly.
4 Optional: If you want to fix the unit to the wall from inside the
unit:
▪ Remove the upper front panel, and open the switch box. See
unit" [ 4 6].
"To open the indoor
▪ Fix the unit to the wall with an Ø8 mm screw.
4 Installation
Installation manual
7