bora PT 11-000 Instrucciones De Montaje Y De Uso página 40

... Installation
► Insert the lenses (red) into the
► Insert the control cabinet with mounted
front cover. Mount the two
them with the supplied nuts and fixing bracket. Maximum tightening torque for
nuts: 10 Nm.
Do not tighten the nuts with pliers or a similar tool!
Use only the enclosed fixing bracket!
Lens
12
power control sleeves
Fixing
bracket
Nuts
Toggles
power control sleeves.
spacer plates
Power control
sleeves
Lens
from the rear into the
from the front and secure
Control unit
Spacer
plates
Cover