DeVilbiss Cvi Manual De Operación página 6

Page 6 SB-2-658-G
1. Remove Needle
Screw (7), Fluid Needle
Spring (8), and Fluid Needle
(9).
4. Remove irvalve Spindle
(11).
7. Push out the Front
Seal with a finger.
10. Fit new Front irvalve Seal
to gunbody and press firmly
to ensure Seal is engaged.
djusting 2. Loosen Housing (10).
5. Using Service Tool SPN-7,
engage groove behind the
Valve Seat.
irvalve 8. Turn the Gun upside down
and let the Seal fall out.
11. Fit
Service Tool so that the
groove faces the handle end
of tool.
New Valve Seat to
3. Remove Housing (10) and
irvalve Spring.
6. Remove Valve Seat.
9. Fit New Front irvalve Seal
to Service Tool so that the
groove faces the handle end
of tool.