Installation/Setting Up; Mechanical Installation - Endress+Hauser Chroma-Log Serie Manual De Utilización

3. Installation/Setting up

3. Mechanical installation

3.1 Installation
Prepare the required panel cut-out:
size 138+1 mm x 138+1 mm (to DIN 43700).
The unit depth is approx. 275 mm.
Push the unit through the front of the panel cut-out.
À
In order to avoid overheating we recommend a rear
spacing of > 10 mm
Hold the unit horizontally and fix the jackscrews into
Á
their respective slots (top/bottom or left/right).
Tighten the jackscrews evenly using a screwdriver.
Â
Hint:
Further support is only required if the panel material is
very thin.
32