Setting Up Strip Chart Recorder; Operating Components - Endress+Hauser Chroma-Log Serie Manual De Utilización

3. Installation/Setting up

3.6 Setting up strip chart recorder

3.6.1 Pull chassis from casing
Completely open the recorder front door, remove the
cassette. Lift the blocking spring
part of the cassette area); Grip the chassis by the holes
in the separation panel
cassette area) and pull the chassis out up to the stop.
Pull out cassette

3.6.2 Operating components

All operating components are easily accessible on the
right hand side of the recorder chassis. Here you will
also find a short form operating instruction.
Operating elements
36
(in the lower right
Ê
(in the upper part of the
Ë
pull out chassis
Measurement range DIP
switches