Items Supplied; Technical Data - EINHELL DSP 226 Manual De Instrucciones De Operación Y Mantenimiento

Anleitung DSP 226
GB
Dear Customer,
Before you use the suck-and-blast gun for the first
time, please read these instructions and note the
information for the tool's operation and maintenance.
Always keep this manual with the tool.

1. Items supplied

1 suck-and-blast gun
1 plug-in nipple R 1/4"
1 suction hose
1 suction tube
3 nozzles Ø 5 mm
1 socket wrench

2. Technical data

Permissible working pressure max.
Air consumption
Recommended hose diameter
Compressed air quality
Air supply via conditioning unit with filter pressure
reducer and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW.
Work settings
6 bar working pressure set at the pressure
reducer or filter pressure reducer
Please note:
When working with the suck-and-blast gun, be
sure to wear the necessary protective clothing,
particularly goggles and safety gloves.
Observe the safety regulations.
4
13.11.2001 7:43 Uhr
6 bar
approx. 100 l/min.
Ø 9 mm
cleaned and oiled
Seite 4
3. Illustration
F
D
C
A
Item Description
A suction hose
B suction tube
C hose connection
D plug-in nipple for the air supply
E trigger lever
F blasting nozzles
G air nozzles
4. Proper user
The suck-and-blast gun is a pneumatic tool for
universal service.
It can be used to sand-blast painted parts and rusted
parts.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.
E
B
G