Package Contents; Product Specifications - VWR Water bath W20 Manual De Instrucciones

Package Contents

Description
Water Bath W20
Power cord (EU-plug, UK-plug)
Instruction manual
Installation
Unpack the delivery. Check that the unit is not damaged and that all parts are included.
Place the unit on the work area. Connect the unit to an electrical grounded mains power socket, use the units
power cord (which has a with ground connection).
Check that the unit is OFF; no lights on the power switch or display. (If the unit is ON, green light on the power
switch and red light on the display, then press the down side of the power switch, the lights goes OFF.)
Intended use and overview
The product is for use at a pathology/histology laboratory for in vitro diagnostics, for preparation of human tissue
sections on glass slides for microscopy. The units casing is made of white powder coated aluminium. The water
bath (inside) is coated with black corrosion resistant thermoplastic. The unit is equipped with a power switch with
green light, a temperature control unit with digital display, internal heating element and an overheat protection
fuse.
The flat black surface is heated and can be used for drying and heating samples. The temperature is slightly
lower than the water temperature.
An optional lid is available to cover the water. It prevents evaporation and dust contamination when the unit is not
in use. VWR order number: 720-2424

Product Specifications

Mains power:
Power consumption:
Temperature range:
Thermostat:
Temp. accuracy:
Water capacity:
External dimensions:
Internal dimension:
Weight:
Quantity
1
2
1
230 VAC 50/60Hz
190 W
+20 to +75°C
Digital
±1°C
1,5 L
W:247 x D:280 mm x H:78 mm
W:198 x D:156 x H:60 mm
2,4 kg
3 (28)
Instruction Manual (GB)