Auger Calibration; Smoke Fan Calibration; Menu Heating Management; Heating Power - Bio Bronpi ELSA Instrucciones De Instalación, Uso Y Mantenimiento

10.4.2.2.

AUGER CALIBRATION

Press key SET. The screen will show the value (Set). With the keys
the value. The original value introduced is 0 and it goes from -7 ... to ...+7 (see drawing D77). Note that each
numerical value modified is equal to modify proportionally in all the powers a 2% of the load time value (in
seconds) set for the auger. After 5 seconds, the new value will be saved and the display will return to the
normal state.
Consider that a higher pellet load means a higher thermal power of the stove and, therefore, a higher fuel
consumption. If you observe that the stove is not burning properly or the mix air/fuel is not appropriate, try to
modify the fuel load.
Fan Calibration
Max: 7
Set: 0
Min: -7
D78
Stove Room Thermostat
Max: 40
Set: 23
Min: 10
D80
This menu allows to programme the stove automatically through a schedule for the day, week or weekend.
10.4.4.1.

SUBMENU MODE

In this submenu, it is possible to choose daily, weekly or weekend programme or disable the programmation
of the stove. You can only choose 1 of the 4 options. It is not possible to choose two or more options. In order
to select an option, it is necessary to use the keys
(see drawing D81).
In this submenu, you don't select time intervals. You simply choose the type of programme that you are
interested in, according to:
- Daily programme: there are three posible times for igniting or turning off the stove for each day of the
week: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday.
- Weekly programme: there are three possible times for igniting or turning off the stove for the 7 days of
the week, that is, from Monday to Sunday there are three possible times for ignition and three possible
times for turn off but this will be applied for the 7 days of the week.
- Weekend programme: there are 3 possible times for igniting or turning off the stove for Monday,
Tuesday, Wednesday, Thursday and Friday. And other 3 different times for igniting or turning off the
stove, only for Saturday and Sunday.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS

10.4.2.3. SMOKE FAN CALIBRATION

Press for a while the key SET. The screen will show the value (Set). With the
keys , it is possible to increase or reduce the value. The original value
introduced is 0 and it goes from -7 ... to ...+7.
-7 ... 0 ...+7 (see drawing D78). Note that each numerical value modified is
equal to modify proportionally in all the powers a 5% of the speed value (in
rpm) set for the smoke extractor. After 5 seconds, the new value will be saved
and the display will return to the normal state.
Consider that a higher speed of the smoke extractor means a higher capacity
to discharge the smoke but also a higher air entry into the combustion chamber (bigger flame). If you observe
that the stove is not burning properly or the mix air/fuel is not appropriate, try to modify the speed of the
smoke extractor.

10.4.3. MENU HEATING MANAGEMENT

This menu modifies the heating parameters of the stove. It has the following
submenus:

10.4.3.1. HEATING POWER

This menu allows to select the power of the hot air tangential turbine. It is
possible to select one of the 5 levels of power. You can modify the power of
the stove according to the values available: power 0, 1, 2, 3, 4, 5 or A (A=
automatic combustion, 0= turbine deactivated) (see drawing D79). After 5
seconds, the new value will be saved and the display will return to the normal
state.

10.4.3.2. ROOM THERMOSTAT

This menu allows to select the temperature desired for the room (see drawing
D80). After 5 seconds, the new value will be saved and the display will return to
the normal state.
10.4.4.

MENU CRONO

IMPORTANT NOTE. Before programming the stove, check that the date and the time of the stove are correct.
On the contrary, the programme will be activated according to the time and date fixed and it may not satisfy
your needs.
and confirm the option selected through the key SET
, it is possible to increase or reduce
48
Auger Calibration
Max: 7
Set: 0
Min: -7
D77
Heating Power
Set: 0
D79
Modality
Chrono Modality
Disabled
Dayly
Weekly
Weekend
D81
ELSA AND PAULA