Maintenance Procedures; Cleaning Procedures - CooperSurgical LEEP PRECISION LP-30-220 Manual De Funcionamiento

LP-30-220 • LEEP PRECISION
For procedures requiring open area plume removal (i.e., external lesions)
1. Assemble the sterile Disposable Evacuation Tubing (Catalog number
6084) directly into the top of the Pre-Filter. Position the opposite end
over the site to be treated.
2. Plug the unit into an appropriate wall outlet (see the Specifications
section).
3. Push the POWER switch to the ON position to start the unit.
4. At the completion of each procedure, activate the system to ensure
safe particle containment. Using gloves and a mask, remove the
Pre-Filter, the Reducer, and the used section of Suction Tubing and
discard into an infectious waste receptacle (see Cautions). The
CooperSurgical LEEP PRECISION Smoke Evacuation System
LP-30-220 should be stored with a new Pre-Filter and Reducer in
place on the ULPA filter.
NOTE: The expected life of the ULPA filter is 3–6 months depending on
usage. It must be discarded into an infectious waste receptacle if plume
odor is detected or the suction is diminished.

Maintenance Procedures

No maintenance is required during normal operation other than making
sure that ample space is maintained around the unit to allow for free air
flow and adequate cooling.

Cleaning Procedures

The outside of the unit may be cleaned as necessary with a soft cloth
dampened (not wet) with isopropyl alcohol. Do not allow liquid to get inside
of the unit.
Specifications
Use
Environmental Temperature:
Relative Humidity:
Air Pressure:
Shipping and Storage
Environmental Temperature:
Relative Humidity:
Air Pressure:
TM
Operating Manual • English (continued)
Smoke Evacuation System, 230 VAC
between +10 °C and +40 °C
between 10 % and 90 %
between 700 hPa and 1060 hPa
between +10 °C and +40 °C
between 10 % and 90 %
between 700 hPa and 1060 hPa
3