Work Area; Electrical Safety; Personal Safety - Craftsman Trak-Cut Manual Del Operador

/kWARNING! Read and understand all instructions. Failure to follow
all instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
,
2.
,
Keep your work area clean and well lit. Cluttered benches and dark
areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
1. Double insulated tools are equipped with a polarized plug (one blade
is wider than the other.) This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install a polarized outlet.
Do not change the plug in any way. Double insulation [] eliminates the
need for the three wire grounded power cord and grounded power supply
system.
2. Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
3. Don't expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
4. Handle the cord carefully. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
5. When operating a power tool outside, use an outdoor extension
cord marked "w-a" or "w". These cords are rated for outdoor use and
reduce the risk of electric shock.
PERSONAL SAFETY
,
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use tools when tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
4