Check Operation - KitchenAid BRIVA KIDS42 Instrucciones De Instalación

Check operation

1. Refer to the Use and Care Guide that came with this
dishwasher and run the dishwasher through a complete cycle.
2. If Hot Water Accessory Tank is installed, wait about 45
minutes before starting the next dishwasher cycle to allow the
hot water tank to finish heating. (Refer to the Installation
Instructions and Use and Care Guide supplied with the Hot
Water Accessory Tank.)
3. When the hot water tank is first heated, it is normal for a small
amount of water to be discharged into the dishwasher.
4. Check for leaks.
8564766
® Registered Trademark/™ Trademark of KitchenAid, U.S.A.; KitchenAid Canada Licensee in Canada.
® Teflon is a registered trademark of E.I. Du Pont de Nemours and Company.
© 2004 All rights reserved.
Printed in U.S.A.
09/2004