Control Panel; In- And Output Connector Table - Legamaster ETX Serie Manual Del Usuario

4.3. CONTROL PANEL

Control pad table
Volume Up
Volume Down
Settings
Home
Back
Source
On/Off

4.4. IN- AND OUTPUT CONNECTOR TABLE

1
Power
1
Connects the e-screen to a power outlet using the supplied power-cable.
USB 2.0
2 USB-A 2.0 port for connecting devices using a usb cable. Also used as
service port.
HDMI out
3
Can be used to connect the e-screen to an external monitor.
HDMI 1, 2
4-5
HDCP-compliant digital video inputs for connecting HDMI sources.
HDMI (ARC)
6
HDCP-compliant digital video input for ARC enabled devices
DisplayPort
7 DisplayPort 1.2, 1.1a and DisplayPort-HDCP 1.1 compliant, SD/HD input for
connecting SDTV, EDTV or HDTV component video sources.
VGA (D-Sub 15 pin)
8 Connects components that have RGB or component output jacks,
such as a personal computer
PC Audio In
9
Connects the audio output from a personal computer
Ethernet
10 An RJ-45 connector for interfacing with a PC or home theater
automation/control system via a Cat 5 cable.
2 3 4 5 6 7 8 9 10 11 12 13 14
Touch USB 2
11 A standard, Type B USB port for the touch functionality of the display.
Linked to HDMI 2 and VGA in Auto setting.
Touch USB 1
12 A standard, Type B USB port for the touch functionality of the display.
Automatically links to HDMI 1 and DisplayPort
SPDIF
13
Connects external, powered digital speakers or audio receiver/amplifier.
Audio Out
14 Connects external, powered speakers or an external audio
receiver/amplifier.
RS-232C
15 A female, 9-pin D-sub connector for interfacing with a PC or control
system.
USB 2.0
16-18
USB-A 2.0 port for connecting devices using a USB cable
ETX-SERIES – USER MANUAL – ENGLISH
INSTALLATION
15 16 17 18
11