Using The Annotation Tool; Settings Menu - Legamaster ETX Serie Manual Del Usuario

6.2. USING THE ANNOTATION TOOL

With the annotation tool, it is possible to draw and
write on the screen, regardless of the source used.
Annotations can be saved to a USB drive.
To open the annotation tool, first open the
navigation bar by swiping up from the bottom of
the screen using 2 fingers. From the navigation bar,
choose the 'pencil' icon to open the annotation
tool.
The annotation tool opens to the right side of the
screen:

6.3. SETTINGS MENU

To display the on-screen settings-menu, press SETTINGS / MENU on the control pad or remote control.
To select a sub-menu, touch the corresponding icon on the bottom of the screen, or use the directional arrows
on the remote to select the menu, and OK to select it.
Touch the item on screen to change it's setting. Alternatively, use the remotes directional buttons (up and down
arrow!) to highlight a menu-item and the < > directional buttons to change it's setting.
The OSD menus are arranged hierarchically, as shown in the following table. Depending on the selected input
source and signal characteristics, some menu options may not be available.
OSD (ON-SCREEN DISPLAY) CONTROLS
— Drag & drop: reposition the toolbar
— Pen: choose color and thickness of the pen
— Eraser: choose eraser size
— Screenshot: makes a screenshot. *
— Erase all annotations
—
Undo last step
— Exit: closes the annotation bar
*Note: When using the android module, screenshots are
saved in the Android picture library, accessible through
the File Manager. When no Android module is used,
screenshots can only be saved when a USB-drive is
inserted in one of the e-screens USB slots.
ETX-SERIES – USER MANUAL – ENGLISH
15