Changing The Remote Control Battery; About The Remote Control - Legamaster ETX Serie Manual Del Usuario

INSTALLATION
4.5. REMOTE CONTROL

4.51. Changing the Remote Control Battery

1. Remove the battery cover:
On the backside of the remotecontrol, slide
down the battery cover.
2. Insert batteries:
use two AAA batteries and insert them
according to the plus and minus indicators in
the remote control.
3. Close the battery cover
by sliding it back into place.
12
ETX-SERIES – USER MANUAL – ENGLISH
Label Description
Turn the display on and off
Back / return to previous menu
Navigational buttons
Select / confirm (when in menu) or Freeze screen
(when not navigating menu's)
Menu
Home
Source selection menu
Volume down
Mute
Volume Up
I. Discard batteries according the local waist reduction
II. Do not keep used, empty batteries in the remote
III. Only use batteries according to the instructions

About the remote control

• Don't drop, shake or bump.
• Avoid moist conditions, liquids, high-temperatures
• Don't dismantle.
and recovery regulations.
control. They can leak and result in damages to the
remote control.
and regulations found in this manual and to
the instructions and regulations set forth by the
batteries' manufacturer.
CAUTION
and/or exposure to direct sunlight.