Manual Operations; Manual Operations By Station - Toro TMC-424 Manual Del Usario

Manual Operations

There are several methods by which the TMC-424 can be operated manually.
A separate Function Dial position is provided for Manual Stations
and Manual Programs

Manual Operations by Station

The TMC-424 offers two ways to manually activate individual stations. The first
method, called "True Manual" enables an individual station to be simply turned
on without a specified run time duration.
The second method called "Timed Manual" enables selected stations to be run
with a selected (temporary) run time duration.
• True Manual Operation
1. Turn the Function Dial to the Manual Stations
2. Press the button as needed to display the station number (flashing).
3. Press the button to turn on the station. ON and the Water On
displayed.
Note: The station will run continuously until any button is pressed or the
Function Dial is turned. Watering will terminate at midnight if left unattended.
IMPORTANT: True Manual operation will override all flow-sensing limits.
• Timed Manual Operation
1. Turn the Function Dial to the Manual Stations
2. Press the button as needed to display the station number (flashing).
3. Press the button to turn on the station. ON and the Water On
be displayed.
4. Press the
5. Repeat steps 2 – 4 to continue selecting stations and assigning run times.
6. When all stations to be operated are displayed, turn the Function Dial to the
RUN position. The operating station number and the Water On
be flashing. The stations will operate one at a time in numeric sequence. The
automatic mode will resume when the manual operation is finished.
Note: To turn off an active station and start the next station in sequence,
press the button. Manual operation will be terminated when the last station
number displayed has completed it's run time or has been skipped.
To end the a manual operation at any time, turn the Function Dial to the OFF
position. Wait for OFF to stop flashing, then turn the dial to the RUN
12
operation.
or buttons to select a run time.
operation
position.
position.
icon will be
icon will
icon will
position.