Function Description; P1.1 Global; P1.1.2 Prebrewing; P1.1.3 Milk Drainage - LAVAZZA Cap 100US Manual De Instalación Y De Uso

12.5 Function description

p1. Products
p1.1. Global
p1.1.1. AutoProgram
p1.1.2. Prebrewing
p1.1.3. Milk Drainage
p1.1.4. Milk Cleaning
p1.2. Details
p1.2.1. Left products
p1.2.2. Right products
p1.2.3. HotWater
p2. System
p2.1. Temperature
p2.1.1. Delta Temperature
p2.1.2. Coffee Heater
p2.2. Security
p2.2.1. Operator Password
p2.2.2. Technical Password
p2.3. Options
p2.3.1. Cup Heater
p2.3.2. Antifreezing
p2.3.3. Unit Visible
p2.3.4. Buzzer
p2.4. Date/Time
p2.4.1. Date
p2.4.2. Date Format
p2.4.3. Time
p2.4.4. Time format
p3. Factory Default
s1. Maintenance
s1.1. Water filter
s1.1.1. New filter date
s1.1.2. Liters to Renew
s1.1.3. Filter limit
s1.1.4. Reset filter
s1.1.5. Filter enable
s1.2. Drillers
s1.2.1. Warning enabled
s1.2.2. Left driller state
s1.2.3. Right driller state
s1.3. Test mode
s1.3.1. Master test
s1.3.2. Left Coffee test
s1.3.3. Right Coffee test
s1.3.4. Water/Steam test
s2. System Info
s2.1. Identification
s2.1.1. Software Version
s2.1.2. Machine Code
s2.2. Error Log
s2.2.1. Errors
s2.2.2. Reset log
s2.3. Audit
s2.3.1. Counters from init
s2.3.2. Counters from reset
s2.3.3. Reset Audit
s3. Install/Uninstall
s3.1. Install
s3.1.1. Language
s3.1.2. Machine Code
s3.1.3. Display Contrast
s3.2. Uninstall
s3.2.1. Empty Boiler
P1.1.
Global
P1.1.1.
AutoProgram
P1.1.2.
Prebrewing
P1.1.3.
Milk Drainage
P1.1.4.
Milk Cleaning
P1.1
GLOBAL
P1.1.1 Auto-programming
This functions enables to set the beverage dose.
To set the dose, press the "ENT" key and access the menu item
"P.1.1.1.1 AUTOPROG. RUNNING":
- to program the keys ,
start the programming, press the key again to save the desired
dose.
- to program the keys ,
start the programming of the product, press the key again to save
the desired dose of coffee and press the key again to save the
desired dose of milk.
The saved values will be shown on the display at the end of the
programming.

P1.1.2 Prebrewing

This function enables to stop the first brewing phase for a while. This
may improve the quality of coffee which can "brew" with the first
part of water, during the stop.
The length of the stop can be set with increasing values: 0, +, ++,+++.

P1.1.3 Milk drainage

This function indicates the opening time of the solenoid valve drai-
ning the condensate in the pipe which supplies the steam to the
cappuccinatore. It can be adjusted from 0 to 8 seconds.

P1.1.4 Milk cleaning

This function indicates the length of steam washing which is perfor-
med at the end of any milk dispensing. It can be adjusted from 0 to
8 seconds.
and , press the selected key to
and , press the selected key to
• 13 •