0 - I N S T A L L A T I O N; Notes On Location; Machine Positioning; Water Connection - LAVAZZA Cap 100US Manual De Instalación Y De Uso

10 - INSTALLATION

10.1 Notes on location

The machine must be installed in a dry and sheltered area, with:
- ambient temperature: +10° C + 25° C
- maximum humidity: 65%.

10.2 Machine positioning

IMPORTANT
Check that the installation surface is large and solid enough to
support the machine safely.
Make a Ø 100 mm hole (A - F. 5) on the supporting surface.
Place the machine in a steady position on the supporting surface (the
circles B – F. 5 indicate the optimal position of the adjustable feet).
Level the machine using the adjustable feet (F – F. 7).
B
296
75
B
F. 5
WARNING /IMPORTANT
For a correct and ergonomic use of the machine, it is
recommended to install it onto a surface which is at least 1 m
high.
• 8 •
A
296
667
B

10.3 Water connection

WARNING
Water and waste connections shall complhy with applicable
federal states, or local codes.
WARNING
Water hardness should never be above 8°F.
It is essential to supply the machine with water treated by a descaling
device, which guarantees compliance with the abovementioned limita-
tions. Make sure the water network provides drinking water, with pressu-
re ranging between 1 and 8 Bars.
- Connect the purifier (C) to the water network (D).
IMPORTANT
Before connecting the purifier to the machine, perform a washing
cycle until the water is clear; then proceed with the connection
of the purifier to the machine.
C – PURIFIER
D – WATER NETWORK
E - DRAIN CHANNEL
B
F. 6
Connect a drain hose to the coupling (H – F. 7) and fasten it using the
hose clamp.
Using only using a hose and couplings made of "food-safe" materials,
connect the machine to the drinking water network, by means of the
coupling (I – F. 7).
Insert the outlet and filling pipes into the hole A.
F
G
F. 7
C
D
E
H
H
I