To Clean & Protect Exterior Surfaces - Thermador MASTERPIECE WDC30J Manual De Instalación

To Clean and Protect Exterior Surfaces
The stainless steel surfaces may be cleaned by wiping with
a damp soapy cloth, rinsing with clear water and drying
with a soft cloth to avoid water marks. Any mild glass
cleaner will remove fingerprints and smears.
For discolorations or deposits that persist, refer to the Use
and Care Guide.
To polish and protect the stainless steel, use a cleaner/
polish such as Stainless Steel Magic
English 12
®
.
DO NOT allow deposits to remain for long periods of time.
DO NOT use ordinary steel wool or steel brushes. Small
bits of steel may adhere to the surface causing rust.
DO NOT allow salt solutions, disinfectants, bleaches or
cleaning compounds to remain in contact with stainless
steel for extended periods. Many of these compounds
contain chemicals which could prove harmful. Rinse with
water after exposure and wipe dry with a clean cloth.
Specifications are for planning purposes only. Refer to
installation instructions and consult your countertop
supplier prior to making a counter opening. For the most
detailed information, refer to the installation instructions
accompanying this product or write THERMADOR
indicating the model number.
We reserve the right to change specifications or design
without notice. Some models are certified for use in
Canada. THERMADOR is not responsible for products
which are transported from the U.S. for use in Canada.
Check with your local Canadian distributor or dealer.
®