Installer Final Check List
Specified clearances maintained to cabinet surfaces.
Unit is level.
All packaging material removed.
Electrical
Receptacle with correct over-current protection is
provided for service cord connection.
Proper ground connection.
Owner is aware of location of the main circuit breaker.
Operation
Drawer handle is level and centered. Drawer opens
and closes properly.
INSTALLER: Write the model number and serial
number found on the Data Rating Label in the
Leave the
AND CARE GUIDE.
and the
INSTALLATION MANUAL
appliance.
Service
If the warming drawer elements or indicator light do not turn
on, check the power source to see if the circuit breaker is
tripped.
See Use and Care Guide for troubleshooting information.
Refer to the Warranty in the Use and Care Guide.
To reach a service representative, see the contact
information at the back of the manual. Please be prepared
with the information printed on your product data label
when calling.
USE
USE AND CARE GUIDE
with the owner of the
Data Rating Label
The data rating label shows the model and serial number.
Refer to the data rating label on the appliance when
requesting service. The data rating label is visible on the
left side of the drawer casing.
Data Rating Label
Data plate
Data plate
Data plate
Figure 10: Data Rating Label
English 11