Health O Meter 1100KL Instrucciones De Uso página 15

OPERATING INSTRUCTIONS (CONT)
5. After obtaining the patient's weight, and with the patient remaining on the scale, press the
BMI button.
6. The scale will prompt entry of the patient's height. Use the keypad ▲ and ► buttons to enter
the patient's height.
Note: When weighing in pounds, the height is displayed in inches. When weighing in
kilograms, the height is displayed in centimeters.
7. Once height is keyed in, press the ENTER button.
8. The display will show the patient's BMI.
9. Press the ENTER button to return to the normal weighing mode.
Weight Recall
The last weight reading on the scale can be recalled by pressing the RECALL button. The last
weight reading can be recalled after the scale has automatically or manually powered off. To
clear the display of the recalled weight, press the ENTER button.
Tare Function
When using this scale, the weight of an object, such as a cane, can be subtracted from the total
weight in order to determine the weight of the patient alone. The Tare Function automatically
performs this subtraction. The scale allows a tared weight to be entered manually by using the
keypad, or automatically, as outlined in this section.
Tare
1. With all weight off the scale, press the ON/OFF button to turn on the scale.
2. Wait until the "0.0" LB or "0.0" KG appears on the display.
3. Place the object to be tared on the scale. The display will show the object's weight.
4. Press the TARE button. The scale will zero out, and the word "TARE" will appear at the
bottom center of the display, indicating that there is a tare value for the object.
5. Remove the object from the scale. Once the object is removed from the scale, the display
will show a negative weight, equal to the weight of the object.
6. Place the patient and the object back on the scale. The scale will automatically deduct the
tare weight of the object from the gross weight of the patient and object together.
7. The display will show the patient's weight.
8. With no weight on the scale, the tare value will remain on the display until changed, cleared,
or until the scale is powered off.
9. To remove the Tare, press the TARE button. The word "TARE" will disappear from the
bottom of the display, and the tare value will be cleared from the display. The scale will
resume normal operation.
To Tare with a Known Weight / Pre-Tare (Limit 200 lb / 91kg)
1. Make sure that there is nothing on the scale.
2. Press the ON/OFF button to turn on the scale.
3. Wait until the "0.0" LB or "0.0" KG appears on the display.
4. Press the TARE button for 3 to 5 seconds. The word "TARE" will appear at the bottom
center of the display, prompting the user to enter the tare value.
5. Use the keypad ► and ▲ buttons to enter the weight of the object. Press the ENTER button
when finished.
6. The value entered will show as a negative value on the display.
15