CAUTION AND WARNING
•
To prevent injury and damage to your scale, please follow these instructions very
carefully.
•
Assemble and operate the scale per the enclosed user instructions.
•
Operate this scale exclusively with the AC adapter provided by Health o
®
meter
Professional. Use of an unspecified adapter will void the warranty,
and can pose a serious safety hazard.
•
Prior to using this scale, inspect the AC adapter cord for cracking /
fraying, or for broken / bent plug prongs.
•
Prior to using this scale, ensure that the AC adapter is plugged into an
outlet with the rated voltage appropriate for operation.
•
Ensure that the AC adapter outlet is wired to a circuit breaker or other
protected power source.
•
Unplug the AC adapter, and carefully store both the adapter and adapter
cord before moving the scale.
•
Ensure that the AC adapter and scale do not come in contact with liquids,
excessive temperature, or excessive humidity.
•
Operating this scale at voltages and frequencies other than specified can
damage the equipment and will void the warranty.
•
Do not transport the scale with any weight on the platform.
•
Do not exceed recommended weight limit of 1000 lb / 454 kg for this
scale.
•
For accurate weighing, this scale must be placed on a flat, stable surface.
•
For accurate weighing, verify before each use the proper operation
according to the procedure described in this manual.
•
Do not use in the presence of flammable or explosive materials.
•
For accurate weighing, if the "Lo bAtt" indicator activates, replace the
batteries or switch to the AC adapter as soon as possible.
•
When replacing / inserting batteries, be sure to use all new batteries.
•
To prevent patient injury, the patient must be attended throughout the
entire weighing event.
•
If the scale is being connected to another medical device, the power
adapter must not be used. Disconnect the power adapter from the scale
and use only the battery power.
3