Publicidad
GMFK15CB
PART NUMBER
DESCRIPTION
F11534-350
HCS M10 x 25 x 1.5 Gr 8.8 Z
F40031-020
WASHER FLAT USS 3/8 x 1 GR 2 Z
F31051-350
NYLOCK LOCKNUT M10 x 1.50 Gr 8.0 Z
F41308-050
WASHER SPLIT LOCK M10 Gr 8.8 Z
F42032-020
#2 WASHER FENDER 3/8 x 1-1/4 GR 2 Z
A1758B
Q BUSHING .406 x .75 x .687
F11554-350
HCS M10 x 220 x 1.5 Gr. 8.8 Z
A00180-75AG00
Hollow Rubber Spring
K10553LH-003
GMFK15CB WELDMENT LH PAINTED
K10553RH-003
GMFK15CB WELDMENT RH PAINTED
B90200-CF
SMALL FRONT BOX - 9.5 x 7 x 5.5
B10000
8" x 12" BUBBLE FOR KITS
B00029-010
BARCODE LABEL FOR KIT
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email sales@timbren.com
QTY
LOCATION
4
I1C
4
G1C
2
I1D
2
I1D
4
H2D
2
2
I2B
2
C3B
1
D7F
1
D7F
1
A--E
1
1
Issued:
11/19/2019
TIMBREN INDUSTRIES INC.
www.timbren.com
ASSEMBLY NOTES:
Publicidad
