Adjusting Bass And Treble - HoMedics DocknParty Ultra DP-900 Manual De Instrucciones E Información De Garantía

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Push the RADIO BUTTON on the top of the unit to display the FM radio band
(Figure 1). Press the DOWN or UP BUTTON to select the desired station. The
clock display will reappear after 5-seconds.
NOTE: Hold the DOWN or UP BUTTON for fast advance or press the
DOWN or UP BUTTON for slow advance. (Figure 1).
5. Use the DOWN or UP BUTTON to adjust the system volume. (Figure 1)
6. To turn the unit off, press the POWER BUTTON.

Adjusting Bass and Treble

It is recommended that you adjust the bass & treble while listening to the
Dock n Party Ultra.
1. Press the BASS BUTTON on the unit. The BASS ICON will appear on the lower
right side of the LCD to indicate the bass is selected and bass level will appear
on the LCD display. (Figure 2)
2. While bass level appears on LCD display, push the DOWN or UP BUTTON on the
unit to adjust the bass (from -8 to 8). After 5 seconds the BASS ICON and bass
level will dissapear to indicate the bass level is set.
3. Press the TREBLE BUTTON on the unit. The TREBLE ICON will appear on the
lower right side of the LCD to indicate the treble is selected and treble level will
appear on the LCD display (Figure 2).
4. While treble level appears on LCD display, push the DOWN or UP BUTTON on
the unit to adjust the treble (from -8 to 8). After 5 seconds the TREBLE ICON and
treble level will dissapear to indicate the treble level is set.
Setting And Using The Alarm
1. Push the ALARM SET BUTTON located on the unit once; hour digits will flash
(Figure 1). Push the DOWN or UP BUTTON until the correct hour is displayed.
Remember to set AM or PM (a PM icon is located on the left hand side of the
1 0
display. There is no AM indicator) (Figure 2).
2. Press the TIME SET BUTTON again. The minute digit will flash. Push the DOWN
or UP BUTTON until the correct minute is displayed.
3. Push the ALARM SET BUTTON to toggle until the WAKE MODE BELL ICON
appears at the top of the LCD to the left of the wake mode of your choice; iPod,
radio or beep (Figure 1). After 5 seconds the display will stop flashing.
Note: To wake to iPod/iPhone, your iPod/iPhone must be properly docked in
the unit, or it will default to beep wake mode.
4. When the alarm sounds, press the POWER BUTTON on the unit to turn the
alarm off (Figure 1). The alarm will come on again the next day at the same time.
5. To stop the alarm from coming on the next day, push the ALARM SET BUTTON
located on the top of the unit. The WAKE MODE BELL will disappear from the
LCD display, indicating the alarm is disabled.
Note: If the alarm sounds for 30 minutes continuously it will automatically
turn off.
Snooze Operation
1. Press the SNOOZE/NAP BUTTON on the REMOTE CONTROL while the alarm
sounds (Figure 7). The alarm will go off temporarily and will go on again in approx.
9 minutes. You may use this feature until you turn the alarm off.
Note: To turn off the snooze function prior to the alarm activating, press the
POWER BUTTON twice. The alarm will come on again the next day at the
same time.
Nap Function
The NAP TIMER FUNCTION will wake you after a nap of 15, 30, 45, or 60 minutes with-
out the need to change your regular Alarm settings.
1. If the system is playing, press the POWER BUTTON to off (Figure 1).
1 1

Publicidad

Tabla de contenido
loading

Tabla de contenido