Snapper ST48 Manual Del Propietário página 17

OPERATION
INSTALLING THE BATTERY PACK (See Figure 7.)
• Align raised ribs on battery pack with grooves in the trimmer's battery port.
• Make sure the latch on the battery pack clicks into place and the battery
pack is fully seated and secured in the trimmer before beginning operation.
REMOVING THE BATTERY PACK (See Figure 7.)
• Depress the battery release button (1) in the back of the battery pack and
pull the battery pack out of the tool.
STARTING AND STOPPING THE TRIMMER (See Figure 8.)
• Slide the speed switch (1) to the desired operating speed. Slide the speed
switch to position 1 for low speed or position 2 for high speed.
• Press the safety lock trigger (2). Squeeze the trigger (3) to start.
• Release the trigger to stop.
2
①
②
1
17
Fig. 7
3
Fig. 8