Maintenance; General Maintenance - Snapper ST48 Manual Del Propietário

MAINTENANCE

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and may
be damaged by their use. Use clean cloths to remove dirt, dust, lubricant,
grease, etc.
Always store the machine clean and in a dry enclosure with the battery
charged.
Maintenance task
Visual check of the
tool's safety systems
(distancing device,
carrying eye, safety
casing)
Check the trigger
safety system functions
Visual check of the
tool (no cracks or
deformation)
Visual check of the tool
at the shaft attachment
(no deformations or
wear)
Check the battery level
Inspection of the
tool by an approved
Snapper dealer
Each Every
time the two
machine hours
is used
X
X
X X
X X
X
24
Each After use Every
week
X
year or
when
required
X
X
X