Section 2 Setting Up Wireless Indoor/Outdoor Measuring Device For; Wind, Rain, Thermohygrometer And The Atomsphere Pressure; Introduction; Main Unit - Bresser 4CAST PC Manual Del Usario

SECTION 2 SETTING UP WIRELESS INDOOR/OUTDOOR MEASURING DEVICE FOR

WIND, RAIN, THERMOHYGROMETER AND THE ATOMSPHERE PRESSURE

2.0 INTRODUCTION

MAIN UNIT

It measures indoor temperature and humidity, and displays weather data collected by the remote
weather sensors. It also provides indication of the indoor/outdoor temperature, pressure and
humidity trends, and moon phase.
The main console unit stores around 200 weather records without a computer connection. When
linked to a computer using the USB cable and software provided, the records from wireless
measuring devices can be displayed and saved onto the computer.
WIRELESS OUTDOOR MEASURING DEVICES
The remote weather sensors include a thermo-hygrometer, anemometer (wind sensor) and rain
sensor. All data collected by the sensors is transmitted to the main unit by wireless RF. The weather
station supports a maximum of 5 thermo-hygrometers, allowing 5 channels of temperature/humidity
display. Contents of the Wireless Outdoor Measuring Devices are listed as below.
WIRELESS THERMO HYGRO
or
Hardware Components
• Thermo-Hygro Sensor
Rain Sensor:
• Funnel shaped Lid with
Battery Hatch
• Sensor Base
• Bucket See-saw
Mechanism
• Protective Screen
Anemometer (Wind Sensor):
• Wind Cups
• Wind Vane
• Anemometer arm
• Anemometer base
• Solar Panel
Computer Software
62
Fittings
4 screws for
securing unit to
ground
4 screws for
securing unit to
vertical surface
2m (6ft) USB cable