Resistance; Frequency; Accesories; Battery Replacement - koban KPA 03 Manual Del Usuario

RESISTANCE

RANGE RESOLUTION
200Ω
2kΩ
20kΩ
200kΩ
2MΩ
Overload protection: 250V DC or 250Vrms AC on all ranges.
Open circuit voltage: 700mV

FREQUENCY

RANGE RESOLUTION
2kHz
Accessories
COME WITH THE CLAMP METER
Test Leads Model: T3000
Battery 9V 6F22 or equivalent
Operation Manual

Battery Replacement

If the sign"BAT"appears on the
LCD display, it indicates that battery
should be replaced. Remove the
battery cover of case.
Replace the exhausted battery with a
new one.
www.grupotemper.com
0.1Ω ±1.0% of rdg ±5digits
1Ω
10Ω
±1.0% of rdg ±8digits
100Ω
1kΩ
ACCURACY
1Hz ±2.0% of rdg ±5digits
Before attempting to open the
battery cover, be sure that test
leads have been disconnected from
measurement circuits to avoid
electric shock hazard.
Using this appliance in an
environment with a strong radiated
radio-frequency electromagnetic
field (approximately 3V/m) may
influence its measuring accuracy.
Digital clamp multimeter
ACCURACY
WARNING
WARNING
Instructions manual |
KPA 03
21