Uline H -7033 Manual De Instrucciones página 3

8. Attach top support brackets and adjustable frame
to desktop using drill and eight 5 x 20 mm wood
screws (11). (See Figure 6)
Figure 6
11
11
9. Place programmable handset (6) in desired location
on front edge of desktop. Attach using a drill and
two 5 x 20 mm wood screws (11). (See Figure 7)
NOTE: Back of desktop has two grommet holes.
Front of desktop is the opposite side.
Figure 7
6
PAGE 3 OF 15
ASSEMBLY CONTINUED
11
11
11
10. Connect the power for the control box (5) using
the power cord (8). Connect the programmable
handset (6) and lifting column cables into the
control box. (See Figure 8)
5
8
Figure 8
11. Position loose cords underneath the cable
management trays (7). Attach the cable
management trays to the adjustable frame using
eight M6 x 15 mm machine screws (10). Tighten
using 4 mm hex wrench (12). (See Figure 9)
Figure 9
12. Desk is now fully assembled. Using two people,
carefully flip the desk onto the feet.
13. Plug power cord into outlet. Follow operation
instructions to initialize the desk prior to first use.
5
6
Lifting Column
Cables
12
10
7
0720 IH-7033