Master Forge 1010048 Manual De Instrucciones página 12

10. Assemble the cart front panel
bracket
Attach the cart front panel bracket (N) to
the cart base (M) and the cart front
panel bottom (P) by using two 5/32-32 x
3/8 in. screws(AA). Show in Fig. 10.
Hardware Used
11. Assemble the corner brace
E. Turn the cart right side up and then
attached the corner brace left (L) and the
corner brace right (S) to the cart base (M)
and back cart legs using three 5/32-32 x
3/8 in. screws (AA). Shown in Fig 11.
Hardware Used
12. Assemble the grease tray
brackets
A . Attach the grease tray bracket left(I)
to the left front and the left back legs of the
cart using four 5/32-32 x 3/8 in. screws
(AA). Shown in Fig 12.
B. Repeat to attach the grease tray bracket
right (V) to the right front and the right back
legs of the cart using four 5/32-32 x 3/8 in.
screws (AA).
Hardware Used
12
lowes.com/masterforge
®