Master Forge 1010048 Manual De Instrucciones página 27

CARE AND MAINTENANCE
WARNING: When not connected to your grill, the LP gas tank must be stored in an
upright position in a cool, shady, well-ventilated, outdoor location away from your grill or any
and personal injury.
tank can be dangerous.
weights should be readjusted to a weight that would allow up to 80% of the total weight.
. If the tank is not completely
empty, the scale readjustment must be changed to consider the propane (LP) already in the tank.
capacity or propane (LP).
weather causes the warming of the LP tank, (a hot day, tank life in sun or stored indoors) internal
pressure is created due to expansion of the propane which in turn may cause the LP gas to be
released through the pressure relied valve on the tank. The pressure relief valve is a safety device
required on 20 lb. propane tanks by the Department of Transportation or the National Standard of
Canada, CAN/CSA-B339 Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and
Commission, as applicable, to prevent a catastrophic tank failure due to excessive pressure. LP gas
approved leak-proof sealing compound or plumber's tape. After making connections, check all
joints for leaks using a soapy water solution and a brush.
Stainless Steel
The gas grill is made of stainless steel. Stainless steel is non-rusting in certain conditions; therefore, a
cover and stainless steel cleaner should be used when the grill is not in use.
Wipe with stainless steel cleaner on all non-cooking surfaces once a month.
Never clean the stainless steel when it is hot.
After initial grilling, certain areas of the grill (i.e. the vents, hood and burner box) may discolor. This is
a normal discoloration caused by the intense heat from the burners.
lowes.com/masterforge
®
27