Publicidad
Idiomas disponibles
Idiomas disponibles
Kit Assembly
DIN radio provision with pocket
1. Slide the DIN cage
into the radio housing
and secure by bending
the metal locking tabs
outward. Slide the
aftermarket radio into
the cage until it snaps
into place. (Figure A)
2. Locate the factory
wiring harness in
the dash. Metra
recommends using the
(Figure A)
proper mating adapter
from Metra or AXXESS.
Re-connect the negative
battery terminal and
test the radio for proper
operation. (Figure B)
3. Reassemble dash in
reverse order
of disassembly.
(Figure B)
4.2
Section 5
Ford
1997-1998
99-5801
KIT FEATURES
• DIN radio provision
• Shaft radio provision
• Rear support provision
KIT COMPONENTS
• A) Radio housing • B) Rear support bracket
A
B
TOOLS REQUIRED
• Socket set • Cutting tool
• 86-5618 or AW-FDRT Removal keys
INST-5000
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-1770 - Ford/Lincoln/Mercury harness
for select 1985-2004
• 70-5603 - Low-level amplifier integration
harness for select Ford vehicles
Antenna Adapter:
• Not required
Applications
Ford
Expedition ...............................................1997-1998
F-150 .....................................................1997-1998
F-250 .............................................................. 1998
Table of Contents
Dash Disassembly
– All vehicles ...................................................... 5.1
Kit Assembly
– DIN radio provision .......................................... 5.1
– Shaft radio provision ...............................5.2
5.0
(back)
Publicidad
Capítulos
