Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida página 11

EN
1. From the ÉPIX™ Drive 642 control
panel, navigate to the Info main level.
2. Select IP Address.
3. From the PC, open the Internet
browser.
4. Enter the IP address for the ÉPIX™
Drive 642 you are working with in the
address bar. For example, if the IP
address shown in the product's
control panel is 2.34.58.104, then
type that into your internet browser
address bar.
5. Press ENTER. The Authentication
Required dialog appears.
1. Enter the following information:
·
Enter admin in the User Name
box.
·
Enter admin in the Password
box.
2. Click Log In. The ÉPIX™ Drive 642
firmware window appears.
If the user name/password you entered
is invalid, follow the Factory Reset
procedure.
1. From the Navigation bar, select the
Upgrade tab.
2. From the Firmware Upgrade section,
click Choose File. The Open dialog
appears.
Step 8:
Step 9:
Step 10:
11
ÉPIX™ Drive 642 QRG