Software Upgrade Instructions - Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida

EN

Software Upgrade Instructions

These instructions below apply to VERSION 1 hardware only. Do Not load VERSION 2
software onto VERSION 1 hardware.
The following steps refer to the Windows® 7 operating system environment.
1. Connect the ÉPIX™ Drive 642 to the
router.
Verify the computer is using the same
2.
network as the ÉPIX™ Drive 642
product.
1. From the ÉPIX™ Drive 642 main level,
navigate to Input Mode > Art-Net.
1. Select IP Mode.
2. Select <Static>.
1. From the Windows® start menu, click
the <Start> button.
2. From the Search box, type Network
and Sharing Center. Windows will
generate the search results in the Start
window.
3. Select Network and Sharing Center,
and the Network and Sharing Center
dialog appears.
Step 1:
Step 2:
Step 3:
Step 4:
Input Mode
IP Mode
9
ÉPIX™ Drive 642 QRG
Art-Net
Static