Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida página 8

ÉPIX™ Drive 642 QRG
Connecting ÉPIX™ Products to the Power Supply
The ÉPIX™ Drive 642 uses an RJ45 data connection to link all data ports. You
can connect either 4- ÉPIX™ strips, 1 ÉPIX™ Tile 2.0 or 1- ÉPIX™ Bar per
output on the ÉPIX™ Drive 642. The following diagram illustrates how to
assemble the data connections.
Each port of ÉPIX™ Drive 642 can support 1 pc. ÉPIX™ Bar 2.0, ÉPIX™ Tile 2.0 or 4 pcs.
ÉPIX™ Strip 2.0. Make sure the total length of the connecting network cables (RJ45)
does not exceed 10 meters.
Be sure power is disconnected from the ÉPIX™ Drive 642 before connecting any ÉPIX™
2.0 products. Failure to do so may cause damage and void your warranty.
8
EN
Total length
of cables
cannot
exceed 10 m
Total length
of cables
cannot
exceed 10 m