Signal Connections - Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida

EN

Signal Connections

Computer/Controller
(running Kling-Net
or Art-Net™ protocol)
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers large amount of
DMX512 data using an etherCON® RJ45 connection over a large network. An Art-Net™
protocol document is available from www.chauvetpro.com.
copyrighted by Artistic Licence Holdings Ltd.
This product is not designed to respond to controllers sending in Broadcast mode via
Art-Net™. For best results, use Unicast mode. For information about which control
protocol your controller uses, please contact the manufacturer of your controller.
Kling-Net Connection
Kling-Net is a network protocol that allows auto configuration of display devices using an
etherCON® RJ45 Ethernet connection. Refer to the ArKaos software manual for detailed
instructions on programming this product.
For smooth-running operation, ArKaos Kling-Net requires a gigabit (1000 Mbps) Ethernet card
and network router.
Router
7
ÉPIX™ Drive 642 QRG
Do not use
WAN port!
Art-Net™ is designed and
ÉPIX™
Drive 642
To other Kling-Net
or Art-Net™ Devices