Chauvet Professional EPIX DRIVE 642 Guía De Referencia Rápida página 2

Ocultar thumbs Ver también para EPIX DRIVE 642:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ÉPIX™ Drive 642 QRG
Safety
Notes
·
DO NOT open this product. It contains no user-serviceable parts.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
·
CAUTION: When transferring product from extreme temperature environments, (e.g.
cold truck to warm humid ballroom) condensation may form on the internal electronics
of the product. To avoid causing a failure, allow product to fully acclimate to the
surrounding environment before connecting it to power.
·
CAUTION: This product's housing may be hot when lights are operating.
·
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
·
DO NOT leave any flammable material within 50 cm of this product while operating or
connected to power.
·
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
Always make sure you are connecting this product to the proper voltage, as per the
Technical Specifications
·
Do not operate this product if you see damage on the housing, I/O ports, or cables.
Have the damaged parts replaced by an Chauvet certified technician at once.
·
Do not cover the ventilation slots when operating to avoid internal overheating.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at a
higher temperature.
·
In case of a serious operating problem, stop using this product immediately!
Read all the following Safety Notes before working with this
product. These notes include important information about the
installation, usage, and maintenance of this product.
This icon indicates critical installation, configuration, or
operation information. Failure to comply with this information
may render the fixture partially or completely inoperative,
damage third-party equipment, or cause harm to the user.
There are no user-serviceable parts in this product. Any
reference to servicing in this guide applies only to properly
certified Chauvet technicians. Do not open the housing or
attempt any repairs unless you are certified by Chauvet.
This icon indicates useful, although non-critical information.
in this guide or on the product's specification label.
2
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido