Double Din Radio Provision - Metra 99-3306 Instrucciones De Instalación

1. Cut and remove the center bar
from the radio housing. (Figure A)
2 Snap the Double DIN brackets
to the inside edge of the radio
housing. (Figure B)
3. Slide the Double DIN radio
into the bracket/radio housing
assembly and secure the radio to
the assembly using the screws
supplied with the radio. (Figure C)
4. Snap the Double DIN trim-plate
onto the front of the housing/radio
assembly. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.

Double DIN radio provision

(Figure A)
(Figure B)
99-3306
(Figure C)
6