Iso Radio Provision With Pocket - Metra 99-3306 Instrucciones De Instalación

1. Mount the ISO brackets to the
radio using the screws supplied
with the radio. (Figure A)
2 Slide the radio into the radio
opening until it snaps into place.
(Figure B)
3. Snap the ISO Trim Plate onto
the front of the radio housing.
(Figure B)
4. Snap the pocket into the radio
housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-3306

ISO radio provision with pocket

(Figure A)
(Figure B)
(Figure C)
Right side clip
4