Din Radio Provision With Pocket - Metra 99-3306 Instrucciones De Instalación

1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking outward. (Figure A)
2 Slide the aftermarket radio into the
DIN cage until it snaps into place.
(Figure B)
3. Snap the pocket into the radio
housing. (Figure C)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-3306

DIN radio provision with pocket

(Figure A)
(Figure B)
(Figure C)
3