Spk. Setting Menu - JVC TH-A75 Serie Manual De Instrucciones

SPK. SETTING menu

¶ SIZE
Select this to enter the SIZE sub-
menu.
• You can also set the speaker
sizes using SETTING/ADJUST
buttons on the remote control
(see page 24).
Select one of the sizes for each speaker.
LARGE : Select when the cone speaker size is larger
than 12 cm.
SMALL : Select when the cone speaker size is smaller
than 12 cm.
NONE : (Only for "SURROUND BACK SPEAKER")
Select when no speaker is connected.
CAUTION:
When using the supplied speakers, select "SMALL" for
each. Selecting "LARGE" will damage the speakers.
NOTES:
• If you have selected "SMALL" for the front speakers, you cannot
select "LARGE" for the center, surround, and surround back
speakers.
• If you have selected "SMALL" for the surround speakers, you
cannot select "LARGE" for the surround back speaker.
SUB WOOFER
This item fixed to "USE."
To go back to the SPK. SETTING menu
Press Cursor 3/2.
Speaker diagram
Left front
speaker
Subwoofer
Left surround
speaker
¶ LEVEL
SIZE
FRONT SPEAKER
SMALL
CENTER SPEAKER SMALL
SMALL
SURROUND SPEAKER
SMALL
SURROUND BACK SPEAKER
USE
SUB WOOFER
¶ DISTANCE
Center speaker
Right front
speaker
Right surround
speaker
Surround back
speaker
Select this to enter the LEVEL
sub-menu.
• You can also select sound
output levels using the number
buttons on the remote control
(see pages 17 and 32).
Adjust the output level within the range of –10 dB to
+10 dB for each speaker in 1 step interval.
You can also adjust the speaker output levels checking the
test tone from each speaker.
• Adjust the speaker levels so that you can hear the sound
through all the speakers at the same level.
TEST TONE
Select this to start or stop the test tone.
To go back to the SPK. SETTING menu
Press Cursor 3/2.
NOTES:
• When "NONE" is selected for the surround back speaker, the test
tone does not come out of the surround back speaker and you
cannot adjust the surround back speaker's output level.
• The test tone for the subwoofer does not output.
Select this to enter the
DISTANCE sub-menu.
• You can also set the distance
from your listening point using
SETTING/ADJUST button on
the remote control (see page
25 for details).
Set the distance from the listening point to each
speaker with the range of 0.3 m to 9.0 m (in 0.3 m
interval).
TEST TONE
Select this to start or stop the test tone.
To go back to the SPK. SETTING menu
Press Cursor 3/2.
NOTES:
• If you have selected "NONE" for the surround back speaker, you
cannot set the speaker distance for the surround back speaker.
• When "NONE" is selected for the surround back speaker, the test
tone does not come out of the speaker.
• The test tone for the subwoofer does not output.
TO BE CONTINUED ON THE NEXT PAGE
SPK. SETTING
SIZE
LEVEL
DISTANCE
CROSS OVER 200Hz
RETURN TO INITIAL
SELECT USE TO SELECT, USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER
LEVEL
CENTER SPEAKER 0dB
0dB
SURROUND LEFT SPEAKER
0dB
SURROUND RIGHT SPEAKER
0dB
SURROUND BACK SPEAKER
SUB WOOFER 0dB
TEST TONE
DISTANCE
FRONT SPEAKER 3.0m
3.0m
CENTER SPEAKER
3.0m
SURROUND SPEAKER
3.0m
SURROUND BACK SPEAKER
TEST TONE
55