Setting Up The Hdmi Functions - JVC TH-LB3-B Manual De Instrucciones

Setting up the HDMI functions

You can change the settings of HDMI functions with the menu on
the display.
•
HDMI function optionally includes the controlling signals
employed for the High-Definition Multimedia Interface (HDMI)
standard — Consumer Electronics Control (CEC).
When devices equipped with CEC are connected, each device can
control the others. This system is compatible with some basic
functions of CEC. For example, when you start playback on a
connected DVD/BD player, the unit and connected TV compatible
with CEC automatically turns on.
For details about the CEC function, refer to the operation manuals
of the connected CEC devices.
NOTES
• The CEC function may not work on some CEC devices.
•
The HDMI functions may not work depending on the setting or
status of the unit or the connected devices.
1
Press SETTING to enter setting mode.
2
Press 4 or ¢ to select the item you want to
set. (the setting mode changes as follows:)
BASS \ TREBLE \ HDMI PASSTHROUGH \ HDMI AUDIO
OUT \ CEC CONTROL (\ POWER CONTROL \ SYSTEM AUDIO
\ TV IN)*2
3
Press UP or DOWN to select the setting.
For TV IN, pressing UP or DOWN may cause the setting to
change as follows:
OFF \ D1 \ ARC
4
Repeat 2 and 3 to set up other items.
To exit from the menu, press SETTING.
Items and Contents
HDMI PASSTHROUGH
ON : The audio and video signal are transmitted to the TV
connected to HDMI OUT terminal even if the unit is on
standby.* 1
•
The STANDBY lamp lights orange while the unit is on
standby.
OFF : The audio and video signal are not transmitted to the
TV connected to HDMI OUT terminal while the unit is on
standby.
NOTES
• To toggle between HDMI 1 IN and HDMI 2 IN during standby,
press and hold the HDMI input button for 2 seconds.
•
If HDMI 1 is selected, STANDBY indicator lamp blinks once. If
HDMI 2 is selected, STANDBY indicator lamp blinks twice.
HDMI AUDIO OUT
TV : The audio signal is emitted from the TV connected to
HDMI OUT terminal.
AMP : The audio signal is emitted from the speakers of the unit.
NOTE
If you select ON for System Audio* 2 , you cannot change this setting
(AUTO appears).
CEC CONTROL
ON : Activates the CEC function.
OFF : Deactivates the CEC function.
POWER CONTROL* 2
ON : The unit automatically turns on when you start playback
on a connected DVD/BD player, and turns off when you
turn off the TV connected to HDMI terminals.
OFF : Deactivates this function.
SYSTEM AUDIO* 2
ON : The audio signal is emited from the speakers of the unit,
and the volume control for this System can be operated
by the TV remote control.
OFF : Deactivates this function.
NOTE
Applicable only if the TV supports System Audio and correct setting
have been made on the TV.
TV IN* 2
D1 : The input source of the unit is changed to "DIGITAL 1"
automatically if you change the input source from HDMI
to another on the TV.
ARC : The input source of the unit is changed to "TV ARC"
automatically if you change the input source from HDMI
to another on the TV.
OFF : Deactivates this function.
*
1 The power consumption will be increased.
*
2 These are the settings for the CEC function which are selectable
only when CEC CONTROL is ON.
10