1. Remove (2) screws above the
speedometer cluster.
2. Remove the ashtray, and then
(1) screw exposed in the ashtray
cavity.
3. Remove (2) screws from the lower
steering column panel, and then
loosen the panel at the top.
Note: The panel does not have to
be removed.
4. Unclip the dash trim bezel,
disconnect the light switch wiring,
and then remove the bezel.
5. Remove (4) screws securing the
climate control panel, and then
move the panel slightly out of the
way to expose the radio screws.
6. Remove (4) screws securing the
radio, unplug the connectors, and
then remove the radio.
Continue to kit assembly
Dash Disassembly
(Figure A)
99-3045
2