Civic Se 2005 (Only) - Metra 95-7801 Instrucciones De Instalación

1. Unsnap and remove the trim ring from around
floor shifter.
2. Unsnap and remove larger trim around floor
console shifter.
3. Remove (2) Phillips screws from in between cup
holder and shifter. (Figure A)
4. Unsnap sides of console (2 snaps per side) and
remove with power outlet assembly.
(Figure A)
95-7801
Dash Disassembly
Honda Civic SE 2005
5. Remove (2) Phillips screws from under radio
assembly, facing up. (Figure A)
6. Remove (3) screws securing the climate control
pod to the back of the dash trim bezel and
remove the pod. (Figure B)
7. Remove (4) Phillips screws from each side
securing the factory head radio to the bracket
assembly and remove the radio.
(Figure B)
8
(only)
8. Cut and remove all mounting clips on the radio
housing, EXCEPT clips "B" and "H" (the clips can
be identified by the stamped letter on the back of
the housing, near each clip). (Figure C)
Continue to kit assembly
"H"
(Figure C)
"B"
"B"
"H"