Accord 1990-1993; Accord 1994-1997 - Metra 95-7801 Instrucciones De Instalación

Honda Accord 1990-1993
1. Remove (4) screws from the lower portion of the center console. Remove the
gear shifter knob and lift the console out. Remove the ashtray and ashtray
bracket. Remove (2) screws from the bottom of the radio support, slide the
radio out and disconnect the wiring. (Figure A)
2. Cut and remove all mounting clips on the radio housing EXCEPT clips "C" and
"H" (Figure B, A). Cut and remove the slots on the bottom of the ISO brackets
(Figure B, B). Note: The rear support tray will not be used in this application.
Continue to kit assembly
(Figure A)
Dash Disassembly
"C"
(A)
"H"
(B)
"H"
(Figure B)
95-7801
Honda Accord 1994-1997
1. Remove the ashtray and (1) 3/4" #8 Phillips screw exposed. Open the storage
compartment and remove (2) #8 Phillips screws exposed. Remove the cup
holder tray and (3) #8 Phillips screws inside. Lift the center console out and
remove (2) Phillips screws exposed at the base of the dash trim bezel. Unclip
the bezel and remove. Remove (2) hex-head screws securing the factory radio
and disconnect the wiring. (Figure A)
2. Cut and remove all mounting clips on the radio housing EXCEPT clips "A" and "H"
(Figure B, A). Cut and remove the rear brackets from the rear support tray (Figure B, B).
Continue to kit assembly
"C"
(Figure A)
6
"A"
(A)
"A"
(B)
"H"
"H"
(Figure B)